德國依博羅 | 瑞典斯達芬
首頁
關于我們
EBRO中國
EBRO集團
企業文化
質量體系
新聞資訊
公司新聞
行業新聞
產品中心
中線軟密封蝶閥
高性能蝶閥
襯氟蝶閥
刀閘閥
止回閥
特殊應用閥門
執行器
應用領域
水和污水
粉體輸送
食品飲料
能源
化工
造紙
運輸
資料下載
產品資料
行業應用
視頻資料
產品APP
認證證書
流量計算
聯系我們
Z011-A
根據 EN 593 生產的通用對夾式蝶閥，根據不同行業的應用工況，有多種材質可供選擇。
SBU-Basic
The new switch box generation SBU (Switch Box Unit) is designed to be directly mounted on our pneumatic actuators (acc. to VDI/VDE 3845. EB4.1 - EB12.1). By means of the compact design error sources and the construction volume are reduced.
SBU ADVANCED
Smart Valve Monitoring via Bluetooth interface. Continuous checking of the main functions of valve and actuator.
EBRO SBU IO-LINK
IO-Link Smart Box Unit, compatible with all EBRO valves. End position monitoring and diagnosis via IO-Link or conventional.
RSK
具有通用性，RSK 帶彈簧復位，所有結構都可用彈簧復位版本。
TV
Stafsj?’s knife gate valve TV is used as an isolation valve for a transmitter or sensor on a tank for which a short face-to-face length is required.
SLF
Stafsj?’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.
SLV
D2G
TStafsj?’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.
JT
This complete Junk Trap is designed for really tough process conditions handling difficult and abrasive media. The JT is specially designed to minimize turbulence, erosive wear, and build-up of solids and reject material.
RKO
Stafsj?’s knife gate valve RKO is reliable and particularly well suited for demanding reject and other abrasive media. The valve’s circular inlet and square outlet together with the gate, that has a rectangular shape and a bevel edge, counteracts clogging and blockages, which often is a problem in combination with junk traps, coarse reject and cleaners.
HX
Stafsj?’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
HPT
HP
HG
Stafsj?’s knife gate valves HG have excellent flow characteristics and gives a bi-directional tight sealing.
XV
Stafsj?’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.
MV
Stafsj?’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
WB 14E
Stafsj?’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.
WB14
These valves are all bi-directional and can therefore be installed into pipe systems independent of pressure direction. Full bore and excellent flow characteristics makes them suitable for fluids, sludge and liquids with solids in suspensions such as water, sewage and bio mass.
WB/WB11
SC
該系列直行程氣動執行器專為斯達芬刀閘閥設計，共有六個型號，多種行程可供選擇。
EB-SYD
氣動雙動執行器共有13個型號，采用撥叉式設計。
HP111
對夾式高性能蝶閥采用雙偏心設計，即使在高溫、高壓的工況下，依然能夠穩定工作。
Z014-B
根據 EN 593生產的通用支耳式蝶閥，硫化閥座。
產品展示
? 2022 依博羅閥門（北京）有限公司
SEO標簽
京公網安備11011502037839
您希望如何與我們取得聯系？
010-87851000
ebrobj@ebro.cn
